Double Glazing Seal Repairs
If the seals of double-glazed windows are damaged they can lead to damp and mould. This can cause damage to the frame and walls surrounding it and impact your health.
Fortunately, resealing is a more cost-effective way to fix most uPVC window frames than to replace them. A glazier will typically clean the frame of the window and the glass, apply a new bead of sealant and smooth it.
Water Leaks
Window seals are designed to keep water to stay out of your home. However, when they begin to wear down, it could result in water leaks around your windows. A leaking window annoying, but it can cause expensive damage to the structure of your home. It's important to identify the issue early and get it fixed by an expert before it gets any worse.
double glazing repairs of windows that leak can be found in the glass, but rather on the frame or sill. This is the most frequent sign of a leaky seal. It could be caused by damage to the seal due to weather or age or worn caulking or even a blocked drain resulting in an accumulation of ice or water.
The appearance of water between double-glazed panes is a common sign that the window seal has failed. However, this isn't as risky as a leak because the water doesn't travel far enough to enter your home. It does mean, however that the inert gasses that are trapped between your windows have escaped out. This can lower the insulation value of your window.
Condensation between the panes is another typical sign of a failed seal. This could be caused by an ineffective seal or a damp climate in your home. It could also be a problem with the glass. It's not just annoying but it can also lead to mould and mildew growth in your home. This can be difficult and expensive.
If you are seeing these indications, it's time to conduct an inspection of your double glazed windows. Replacing or repairing windows will safeguard your home from water leaks, lower the cost of energy and eliminate draughts. It's a minimal cost to ensure your family's safety and comfort. Contact Thompson Creek Window to discuss your options regarding window seal repair or replacement. Our staff is always ready to help! We serve homeowners throughout the Mid-Atlantic region.
Condensation
A broken double-glazing seal can let water in the space that is used for insulation. This can lead to fogging or misting in the window panes.
When you notice condensation forming within your home, it's the perfect time to call in a professional double glazing repair service. The condensation is a sign that the vacuum seal fabricated in the factory has failed and moisture is seeping into the gap between the insulated and non-insulated.
Condensation can be caused by number of causes and is usually caused by faulty sealants, gaskets or insulation in the uPVC frames of the windows. Therefore there are different double glazing repair options, however it is crucial that the seal you choose to replace is correctly sized to ensure the perfect fit and water-tight seal.
Typically gaskets used to fill in the gaps between your double-glazed units are made of a material such as polyurethane foam. They are designed to last a long time but they are susceptible to deterioration as time passes due to natural wear and tear, as well as exposure to different temperatures and weather conditions throughout the year.
Over time the foam will shrink or crack over time. This can cause cracks in the seal, allowing moisture to get into the double-glazed window. This not only creates condensation, but it could cause the loss of energy efficiency, which means that you're losing heat from your home to the outside air.
One option for fixing this issue is to have the windows resealed. This is not a guaranteed fix as it will only eliminate the condensation that is already present and not address the issues that are causing the double-glazed windows to leak or create condensate.
Another solution is to replace your windows completely. This should be done by a professional who provides an insurance-backed guarantee. This means that if the company fails or is shut down, you'll remain covered by the insurance. It is important to remember that replacement windows must be warranted for at least 10 years.
Misting
Make sure that the seals on your double-glazing are in good condition as the autumn season draws near. Window seals that are worn out can affect the insulation properties of your windows and can also lead to condensation, dampness and mold. It is essential to address any problems with your double-glazed windows as quickly as you can to prevent further damage and save money on energy bills.
A typical double-glazed window is made from two glass panes joined by an internal space filled with gas. The sealant layer on the outside fills the gap between uPVC frames and the glass. This is crucial to ensure the air-tight sealing that keeps cool and warm air in your home separate and helps you save money on your heating bills. These seals can become damaged in time due to weather conditions, aging or improper installation. After this, the magic insulation formula that makes your double glazed windows so effective can begin to deteriorate.
If the seals are damaged or defective and are not repaired they can cause dampness and condensation, which could affect your health as as the appearance of your window. Damp and mould not only cause damage to your walls, floors and ceilings but can also cause allergens and irritants within your home, which can be harmful to you and your family's health.
The most common problem with double glazing is misting that occurs between the panes. This occurs when moisture is able to get into the insulated part of your window. This can be quite difficult to resolve without expert help with repair of your seal.
There are DIY ways to deal with this problem, however, we'd recommend against this because it's not just risky but also extremely messy and damage your windows. These methods involve drilling holes in the glass units and applying chemicals to eliminate the condensation and fog. This could lead to a variety of issues, including the possibility of exposing your windows and units to water damage.
Professional glaziers have the tools, skills and experience necessary to safely reseal uPVC frames. They also can offer you long-lasting results. They can also provide advice on how to maintain your uPVC window to avoid any future issues.
Draughts
A draft coming from your window means that the sealant may have broken down. It should be repaired or replaced. This will stop the cold air getting into your home, improve efficiency in energy use and lower heating bills and improve the comfort level and temperature control.
It is also important to remember that not all draughts come from the window seals but from the gap between the frame and the bricks. In certain cases, it could be possible to fix this by simply caulking the gap. If this is not successful it will need to be resealed professionally.
If the sealant around the double-glazed window begins to break down, it allows for water ingress and can cause dampness or even mold in certain instances. This can affect your health and could be damaging to property. It is important to address any water leaks immediately you notice them and if your windows are still under guarantee it is worth checking with the company you purchased them from, as they may cover the cost of the repairs.
It is a good idea to check whether the windows are covered by warranties. Certain companies offer lifetime warranties but others only provide 10 years. If your double-glazed windows are under warranty, it's worth calling the company you bought them from as soon as you can and giving them the details of any issues that you're experiencing. It is best to reach the company in person or via email and letter. This will ensure that everything is recorded and clear.
Also, it is important to note that draughts are often caused by faulty hinges, not the lack of seals that are effective. The hinges are responsible for closing the window sash (the section that you open) but they can also become stiff as time passes if they're not regularly oiled. This could leave gaps between the sash and the frame, which can allow cold air in. Replacing the hinges can solve this issue, without affecting window seals.